Enduro® Malaysia | Bicycle Ceramic Bearings | Authorised Dealer https://www.usjcycles.com/brand/enduro-ceramic-bearings/ Bicycle Lifestyle Centre Fri, 08 Jan 2021 16:10:01 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.5 https://www.usjcycles.com/v3/wp-content/uploads/2021/08/cropped-usj-cycles-new-logo-site-32x32.png Enduro® Malaysia | Bicycle Ceramic Bearings | Authorised Dealer https://www.usjcycles.com/brand/enduro-ceramic-bearings/ 32 32 Enduro Hybrid Ceramic Bearings (Hub) https://www.usjcycles.com/parts-components/gear-parts/enduro-hybrid-ceramic-bearings-hub/ Tue, 15 Nov 2016 10:33:21 +0000 https://www.usjcycles.com/parts-components/gear-parts/enduro-hybrid-ceramic-bearings-hub/ Besides the patch where your tires meet the road, what’s the next spinning component that can either slow you down or let you roll faster? You would be correct if you said hubs, but that component would be more accurately described as the bearings inside. And if you've put Enduro Bearings CH ABEC-5 bearings inside, you've just upgraded your hub to another level. Accurately ground and polished to ABEC-5 precision tolerances, Grade 5 Silicon Nitride balls roll with no resistance guided by a graphite nylon retainer. LLB seals keep the dirt out and the Enduro Bearings Formula 7703 grease inside with the dual lip seal design.

Sold in a pair (2pc) = 1 QTY

The post Enduro Hybrid Ceramic Bearings (Hub) appeared first on USJ CYCLES.

]]>
What is ABEC-5?

Annular Bearing Engineering Committee (ABEC).
There are seven classes from largest to smallest tolerances: 1, 3, 5, 7, 9, 11 and 13. The higher ABEC classes provide better precision, efficiency, and the possibility of greater speed capabilities, but do not necessarily allow the components to spin faster.

High rated bearings are intended for precision applications like aircraft instruments or surgical equipment. Lower grades are intended for the vast majority of applications such as vehicles, mechanical hobbies, skates, skateboards, fishing reels and industrial machinery. High ABEC rated bearings allow optimal performance of critical applications requiring very high RPM and smooth operation.

Bearing code : Please refer the existing bearing code written on the rubber seal e.g. 6800-RS

ID = Inner diameter
OD = Outer diameter
Width = Thickness of the bearing

[wpdatatable id=250]

The post Enduro Hybrid Ceramic Bearings (Hub) appeared first on USJ CYCLES.

]]>
Enduro Zero 6805 Ceramic Bearings https://www.usjcycles.com/parts-components/gear-parts/enduro-zero-6805-ceramic-bearings/ Tue, 08 Nov 2016 08:10:29 +0000 https://www.usjcycles.com/parts-components/gear-parts/enduro-zero-6805-ceramic-bearings/ Product Specifications:

  • Dimensions: OD: 37mm / ID: 25mm / Width: 7mm
  • For: Shimano Hollowtech II Bottom Bracket
  • Made in USA

The post Enduro Zero 6805 Ceramic Bearings appeared first on USJ CYCLES.

]]>
Proven time and again in World Cup race conditions, the ZERØ Ceramic bearings are the ultimate race day weapon. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity. More durable and with even lower rolling resistance than any 2RS bearings, they come closer to that magic “zero” rolling resistance number. Enduro Bearings uses Silicone seals which are more slippery than rubber seals used by other ceramic bearing suppliers.

How to read bearing specifications:

Bearing code : Please refer the existing bearing code written on the rubber seal e.g. 6800-RS

ID = Inner diameter
OD = Outer diameter
Width = Thickness of the bearing

[wpdatatable id=251]

The post Enduro Zero 6805 Ceramic Bearings appeared first on USJ CYCLES.

]]>
Enduro BB30 Adaptor (Shimano) https://www.usjcycles.com/parts-components/gear-parts/enduro-bb30-adaptor-shimano/ https://www.usjcycles.com/parts-components/gear-parts/enduro-bb30-adaptor-shimano/#respond Thu, 03 Nov 2016 10:03:21 +0000 https://www.usjcycles.com/?post_type=product&p=25606
  • Weight: 43 grams per pair
  • Made of aluminum
  • Adapts BB30 and Pressfit 30 bottom brackets to fit 24mm crank spindles
  • Compatible with Shimano cranks only
  • The post Enduro BB30 Adaptor (Shimano) appeared first on USJ CYCLES.

    ]]>
    With all the different bottom bracket standards available these days it’s easy to get confused on what fits what. Instead of worrying about getting new cranks for your new BB30 frame, you can swap your 7900 cranks over with the Enduro BB30 adapters. Made in the USA of quality aluminum, the Enduro adapters are more refined than other brands’ adapters and will precisely fit all 24mm spindle cranks including Shimano, FSA, and Rotor.

    The post Enduro BB30 Adaptor (Shimano) appeared first on USJ CYCLES.

    ]]>
    https://www.usjcycles.com/parts-components/gear-parts/enduro-bb30-adaptor-shimano/feed/ 0
    Enduro BB30 Adaptor (Sram) https://www.usjcycles.com/parts-components/gear-parts/enduro-bb30-adaptor-sram/ https://www.usjcycles.com/parts-components/gear-parts/enduro-bb30-adaptor-sram/#respond Thu, 03 Nov 2016 09:49:09 +0000 https://www.usjcycles.com/?post_type=product&p=25609
  • Actual weight 51 grams per pair
  • Made of aluminum
  • Adapts BB30 and Pressfit 30 bottom brackets to fit GXP crank spindles
  • Not compatible with Shimano 24mm spindles
  • The post Enduro BB30 Adaptor (Sram) appeared first on USJ CYCLES.

    ]]>
    With all the different bottom bracket standards available these days it’s easy to get confused on what fits what. Instead of worrying about getting new cranks for your new BB30 frame, you can swap your GXP cranks over with the Enduro BB30 adapters. Made in the USA of quality aluminum, the Enduro adapters are more refined than other brands’ adapters and will precisely fit all Sram GXP spindle cranks.

    The post Enduro BB30 Adaptor (Sram) appeared first on USJ CYCLES.

    ]]>
    https://www.usjcycles.com/parts-components/gear-parts/enduro-bb30-adaptor-sram/feed/ 0
    Enduro BB30 Hybrid Ceramic Bearings https://www.usjcycles.com/parts-components/gear-parts/enduro-hybrid-bb30-ceramic-bearings-copy/ Thu, 03 Nov 2016 03:41:34 +0000 https://www.usjcycles.com/parts-components/gear-parts/enduro-hybrid-bb30-ceramic-bearings-copy/ Ceramic bearings are not only here to stay, they are now the standard, period. When carbon fiber was first introduced, there were many riders still on steel bikes in the Tour de France, but now every racing bike is made of carbon fiber. This is the case for ceramic bearings, and the CH bearings are an excellent choice for entry into the technology. ABEC-5 tolerances and LLB seals with Graphite Nylon retainers are premium features that are not available on our competitor’s ceramic hybrid bearings at two or even five times the cost. Oversized Silicon Nitride Grade 5 balls and cryogenic treatment of the ABEC-5 races ensure long lasting, smooth rolling bearings at great value. These are now also available in Angular Contact (A/C) design, for even greater durability and ultimate speed.

    • Use on BB30 bottom bracket
    • Sold in Pair (2 pcs)

    The post Enduro BB30 Hybrid Ceramic Bearings appeared first on USJ CYCLES.

    ]]>
    The post Enduro BB30 Hybrid Ceramic Bearings appeared first on USJ CYCLES.

    ]]>
    Enduro Zero BB30 Ceramic Bearings https://www.usjcycles.com/parts-components/gear-parts/enduro-zero-bb30-ceramic-bearings/ Thu, 03 Nov 2016 02:14:21 +0000 https://www.usjcycles.com/?post_type=product&p=25565 Proven time and again in World Cup race conditions, the ZERØ Ceramic bearings are the ultimate race day weapon. Oversized Grade 3 balls roll on races which are ground to a mirror finish after receiving Magnetite and then Cryogenic treatments for hardness and longevity. More durable and with even lower rolling resistance than any 2RS bearings, they come closer to that magic “zero” rolling resistance number. Enduro Bearings uses Silicone seals which are more slippery than rubber seals used by other ceramic bearing suppliers.

    • Use on BB30 bottom bracket
    • Sold in Pair (2 pcs)

    The post Enduro Zero BB30 Ceramic Bearings appeared first on USJ CYCLES.

    ]]>
    How to read bearing specifications:

    Bearing code : Please refer the existing bearing code written on the rubber seal e.g. 6800-RS

    ID = Inner diameter
    OD = Outer diameter
    Width = Thickness of the bearing

    [wpdatatable id=251]

    The post Enduro Zero BB30 Ceramic Bearings appeared first on USJ CYCLES.

    ]]>